Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Other
$5.99
Bar Tape Clips are simple little plastic replacements to the dreaded electrical tape that's often used to finish off wrapped bars. These clips work with one or two internal cables, either on oversized 31.8 bars (where it tapers down to 28.6) or old-school 28.6 bars.
$74.95
A neoprene pogie designed to allow riders to change positions from hoods to drops without removing hands from the mitts. Internal or external cable routing options.
- Water-proof, 5mm neoprene construction with nylon lamination inside and outside
- Attaches to handlebars and can be easily installed and removed for temperature changes
- Can be used with regular cycling gloves of varying thickness
- Reflective material on seam and logo
- Stays open, allowing easy access and removal of hands
$74.95
A neoprene pogie designed to work with flat or riser style handlebars to keep hands warm when encountering the cold, wind, rain and/or snow.
- Waterproof, 5mm neoprene construction with nylon lamination inside and outside
- Attaches to handlebars - can be easily installed and removed for temperature changes
- Can be used with regular cycling gloves of varying thickness
- Reflective material on seam and logo
- Stays open, allowing easy access and removal of hands
- Vent zipper can be opened if hands start to overheat
- Measures 10" wide by shifters/brakes
$74.95
A neoprene pogie designed to fit on handlebars to keep hands warm when encountering the cold, wind, rain and/or snow.
- Waterproof, 5mm neoprene construction with nylon lamination inside and outside
- Attaches to handlebars - can be easily installed and removed for temperature changes
- Can be used with regular cycling gloves of varying thickness
- Reflective material on seam and logo
- Stays open, allowing easy access and removal of hands
$74.95
A neoprene pogie designed to work with drop handlebars fitted with integrated shift/brake levers with externally routed shift cables and housing.
- Waterproof, 5mm neoprene construction with nylon lamination inside and outside
- Attaches to handlebars - can be easily installed and removed for temperature changes
- Can be used with regular cycling gloves of varying thickness
- Reflective material on seam and logo
- Stays open, allowing easy access and removal of hands
- Opening measures 8.5" across
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with flat or riser style handlebars to keep hands warm.
- Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside
- Removable Velcro cuff provides increased insulation from cold
- Vent zipper can be opened if hands start to overheat
- Can be easily installed and removed for temperature changes
- Reflective material on seam and logo
- Measures 11" wide by shifters/brakes
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm.
- Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside
- Removable Velcro cuff provides increased insulation from cold
- Vent zipper can be opened if hands start to overheat
- Can be easily installed and removed for temperature changes
- Reflective material on seam and logo
- The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long
- Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm.
- Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside
- Removable Velcro cuff provides increased insulation from cold
- Vent zipper can be opened if hands start to overheat
- Can be easily installed and removed for temperature changes
- Reflective material on seam and logo
- The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long
- Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts, and is designed to work with flat or riser style handlebars to keep hands warm.
- Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside
- Removable Velcro cuff provides increased insulation from cold
- Vent zipper can be opened if hands start to overheat
- Can be easily installed and removed for temperature changes
- Reflective material on seam and logo
- The original S/M size is designed to fit most, measuring 10" wide across shifters/brakes and 11" long
- Large size is designed for 10.5" wide across shifters/brakes, measures 12" long, and has a 1" gusset on the inside and outside seam
$125.00
A neoprene pogie intended for colder temperatures beyond the standard Bar Mitts and is designed to work with drop bar style handlebars to keep hands warm.
- Waterproof, 6mm thick neoprene - Fleece lined inside and nylon lamination outside
- Removable Velcro cuff provides increased insulation from cold
- Vent zipper can be opened if hands start to overheat
- Can be easily installed and removed for temperature changes
- Reflective material on seam and logo
- Opening measures 9" across
$19.99
An adjustable rear-mount kick stand that fits bikes of all sizes, from 24 inch to 29 inch wheels.
Keep your bike safely upright and at the ready with the Rear Mount Adjustable Kickstand. Adjustable length makes it suitable for bikes with 24-29" wheels and installation is a breeze with all necessary hardware included.
Product details
- Adjustable length fits bikes with 24-29" wheels
- Attaches to the rear of the bike near intersection of seatstay and chainstay
- Includes mounting hardware
$22.99
An adjustable, rear integrated kickstand that supports kids bikes, from 20" to 26" wheels.
A leg to stand on for most kid's bikes
Intended for kid's bikes with an integrated mount at the rear dropout, this ultra-stable kickstand with an adjustable length will keep your little riders' bikes upright. Installation is quick and easy and the adjustable length works for bikes with wheels from 20" wheels all the way to 26" wheels.
Product details
- Adjustable length fits bikes with 20-26" wheels
- Compatible with Trek bikes equipped with integrated direct mount chainstays
- Doesn't interfere with pedaling
- Includes both M5 and M6 mounting hardware
$25.99
Keep your bike safely upright and at the ready with the Rear Mount Adjustable Kickstand. Adjustable length makes it suitable for bikes with 24-29" wheels and installation is a breeze with all necessary hardware included.
- Adjustable length fits bikes with 24-29" wheels
- Attaches to the rear of the bike near intersection of seatstay and chainstay
- Includes mounting hardware
$11.99
- Proofide is the only substance that should be used to care for all Brooks Leather Saddles
- A new saddle should be treated with Brooks Proofide leather dressing to help assist the breaking-in process
- Proofide keeps the leather supple as it is specially formulated from natural ingredients to condition, preserve and shower proof the saddle
$29.99
The Frame Mounting Block provides the critical connection from the Dash FM and Dash X FM to your bicycle. The mounting block is easily installed on bikes with round and oval frame tubes—simply snap the mounting rails into place, fasten the safety strap, and quickly get on your way. Pick up a spare mounting block to install on each of your bicycles for quick transitions.
$18.99
Keep that bike upright with a new kickstand.
Genuine replacement parts.
- Kickstands make it easy to park your bike anywhere while keeping it from getting damaged.
- Replacement cruiser integrated kickstand
- For easy removal and installation use Electra Cruiser Integrated Kickstand Tool
- Fits bikes with 26" wheels
$18.99
Keep that bike upright with a new kickstand.
Genuine replacement parts.
- Kickstands make it easy to park your bike anywhere while keeping it from getting damaged.
- For use on bikes with integrated kickstand mounts.
- Hardware included.
$9.99 - $13.49
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes!
- 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)
- For bikes without factory mounting plate (includes top plate and bolt)
- Certified Non-Corrosive Casting
- Snap Action Mechanism
- Non-Slip Clamping Surface
$10.99 - $12.99
This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA.
- 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over)
- Certified Non-Corrosive Casting
- Snap Action Mechanism
- Non-Slip Clamping Surface
$12.99 - $14.99
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes!
- For bikes without factory mounting plate (includes top plate and bolt)
- 285mm (for bikes 22" and under)
- Certified Non-Corrosive Casting
- Snap Action Mechanism
- Non-Slip Clamping Surface
$12.99 - $13.99
The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA.
- For bikes with a factory mounting plate (includes bolt)
- 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over)
- Certified Non-Corrosive Casting
- Snap Action Mechanism
- Non-Slip Clamping Surface
$24.99 - $26.99
Greenfield's Stabilizer Rear-Mount Kickstand attaches to the rear chainstay of the bicycle so it's perfect for bikes that won't accept regular kickstands like mountain bikes. It comes complete with an extra wide rubber foot for superior stability and won't interfere with pedal action or rear derailleur cables. This is the stand of choice for law enforcement bike patrols throughout the U.S.
- Fits tube sizes up to 7/8" in diameter
- Certified Non-Corrosive Casting
- Snap Action Mechanism
- 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)
$40.00 - $45.00
No graphics. No logos. Just a clean layer of protection, available in matte or gloss.
Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size.
- 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub.
- Easy to apply. No water necessary.
- Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife.
- An affordable way to customize your bike.
$48.00
Our Cheetah print is guaranteed to make you 20% faster and 100% feistier. The kit is clear so your frame will be visible.
- Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size.
- 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub.
- Easy to apply. No water necessary.
- Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife.
- An affordable way to customize your bike.
$48.00
Universal kit designed to fit all bikes and sizes. Includes 6 easy-to-trim pieces for top tube, downtube, chainstays, and seat stays.
- 10 mil guards protect frame from scratches, chips and shuttle/cable rub
- Applying to road or gravel bike? Simply narrow pieces to desired width using scissors or exacto knife
- An affordable way to customize your bike with rad designs
- Made in the USA
$48.00
A modern halftone camo pattern that looks great on dark and light bikes alike! Frame protection is clear so your frame will be visible.
- Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size.
- 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub.
- Easy to apply. No water necessary.
- Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife.
- An affordable way to customize your bike.
$48.00
Mid-century modern has finally escaped the living room and gracefully landed in our newest collection, Maze Runner. It’s our classiest design yet, available in three righteous colorways across our fender, frame keeper and topcap lineup.
- Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size.
- 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub.
- Easy to apply. No water necessary.
- Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife.
- An affordable way to customize your bike.
$48.00
Taste the rainbow, kids! Frame protection is opaque so frame will not be visible under Frame Keeper.
- Universal kit designed to fit all bikes and sizes. Comes with 6 easy-to-trim pieces for toptube, downtube, chainstays, and seatstays. Designed to fit XL frames, and is easy to trim down to the desired size.
- 10 mil guards protect frame from scratches, chips, and shuttle/heal/cable rub.
- Easy to apply. No water necessary.
- Applying to road or gravel bike? Simply narrow pieces to the desired width using scissors or Exacto knife.
- An affordable way to customize your bike.
$16.99
Protect your frame from impacts, nicks, and scratches.
- A clear self adhesive frame protector film (roll)
- Roll size: 50mm x 1.5m x 0.2mm (thick), 2" x 60"
$19.99
Protect your frame from impacts, nicks, and scratches.
- A clear self adhesive frame protector film (roll)
- Roll size: 75mm x 1.5m x 0.2mm (thick), 2" x 60"
$24.99
Protect your frame from impacts, nicks, and scratches.
- A clear self adhesive frame protector film (roll)
- Roll size: 50mm x 1.5m x 0.2mm (thick), 2" x 60"
$49.00
- Accessory for the Shotgun 2.0 MTB seat
- Allen key fixing for easy fitting, removal and adjustment
- 250mm in length, with Pro 19mm rubber grips designed for little hands
- Comes with inserts to fit 25.4mm, 31.8mm and 35mm handlebar diameters
- Suitable for flat or riser style handlebars
- Your child will love riding up front when they have their own handlebars and grips to hold onto
$49.99
Introducing the Piston® Pro X LICENSE PLATE MOUNT. Simply remove the endcap, and attach the mount to achieve unparalleled visibility on the road. Upgrade your ride and hit the road with confidence and style.
- For use with Piston® Pro X
- Billet machined aluminum
- Rotates for use in stowed or in-use position
- Black Anodized
$9.49
The Lizard Skins Patch Kits are made with high performance adhesive and will protect your frame from nicks and scratches.
All patch kits come with 2 large, 4 medium and 2 small patches.
- 14 mils thick for premium durability
- UV resistant – won’t fade or discolor
$10.99 - $12.99
Ride with minimal chain slap by using a Chainstay Protector. Comes in 5 sizes and 4 colors giving you the versatility needed no matter what you ride. Designed and made in our Utah facility, the Chainstay Protector is made with neoprene and sewn with a tight stitch and heavy-duty thread for extra strength and durability. Lizard Skins chainstay guards are the original, strongest and lightest protectors on the market since 1993.
$10.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive.
- 32mm wide x 222mm long
- 3 extenders included for desired protection
$14.99
You asked for it. This Fork Protector is designed to help prevent scratches from happening to your stanchions. Whether it's from rocks, wear from the adventures of travel, or bug guts during roof rack transportation, this will help protect your fork.
- Fits Fork Stanchion size 32-36mm
- Fits forks up to 180mm in travel
- Weight: 31 grams (pair)
$26.99
Lizard Skins adhesive bike protection offers protection from nicks and scratches and is made with high performance adhesive.
- 64mm wide x 305mm long
- 3 Extenders included for desired protection
$15.00
The Seltzer mount is designed to carry a standard bottle cage and two threaded CO2 cartridges, in a clean and compact way.
- Holds one standard bottle cage
- Accommodates two threaded CO2 cartridges, up to 25g
- Can be installed directly to bottle cage mounts on frame
- Bottle cage and cartridges sold separately
$24.99 - $25.00
The Seltzer mount is designed to carry a standard bottle cage and two threaded CO2 cartridges, in a clean and compact way.
- Holds one standard bottle cage
- Accommodates two threaded CO2 cartridges, up to 25g
- Can be separated and installed directly to bottle cage mounts on frame
- Includes seatpost adaptor and bottle cage bolts
- Bottle cage and cartridges sold separately
$34.99
- Stabilizes bike with double-leg stance
- Fits most 26" and 700c bikes
- Made of lightweight aluminum
- Mounting plate included to fit a variety of bikes
$14.99
- EverClear Roll is 12 micrometers (µm) thick and offers 2 x 60-inches of high-quality protection film
- It's designed to protect your frame against anything from rock chips to cable rubs and everything in-between.
- Included is a sheet large enough to cover your down tube, top tube, chain-stay, cable rub points and
crank arms. Also works great for fork lowers, shock bodies, and more! Especially great for protecting carbon frames or decals.
- It’s easy to cut and apply—simply trace and cut your desired pattern(s), clean your surface, and apply where necessary!
- Want to boost re-sale value of you bike? EverClear is your ticket! By applying this stealthy 12µm protection to your frame when it’s new, you can preserve that new look without using any bulky and ugly frame protection. Then, when it’s time to sell, you can remove the EverClear, and you are left with a beautiful like-new bike that’s ready to get top dollar in re-sale.
- Made in the USA
$19.99
- Easy to apply: Simply peel off and install
- Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and damage to your cranks
- Durable, weatherproof 3M adhesive
- 2-piece pack is designed to fit most cranks
$29.99
The solution for protecting your disc brakes during maintenance or transit. The patent pending eye catching design makes life simple, fast and easy to use, Muc-Off's disc brake covers help to ensure you won't have protectant or lube overspray on your discs.
- Sold in pairs
- Protects rotors from lubricant and brake oil
- Fits all MTB and road rotors
- Made from breathable neoprene
- Rinse and hang dry after use
$39.99
- Easy to apply: Simply peel off and install
- Ultra-Tough Cube-Tec protection shields against chain slap, scratches, scuffs, stone chips, cable rub and other damage to your chainstays
- Durable, weatherproof 3M adhesive
- 20-piece pack is designed to fit chain stays and rear stays on most bikes
$44.99
- Easy to apply: Simply peel off and install
- Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips, cable rub and other damage to your forks
- Durable, weatherproof 3M adhesive
- 8-piece pack is designed to fit most front suspension forks
$99.99
- Easy to apply: Simply peel off and install
- Ultra-Tough Cube-Tec protection shields against scratches, scuffs, stone chips and other damage to your frame, toptube, downtube, chainstays and cable rub areas
- Extra wide downtube pieces to cover wider E-Bikes
- Durable, weatherproof 3M adhesive
- 45-piece pack will fit most E-MTB’s with wider down tubes
$28.00
Chainstay Protection
Stay Skinz, Clear is specifically designed to discreetly provide bomb-proof protection for your seat and chain stays against impact and wear, commonly picked up on the trails and in transit.
$35.00
Frame Protection
Protect your bike against body snatchers, the blob, and those troublesome triffids. Specifically designed to protect your bike's exposed areas against knocks and wear, commonly picked up on the trails and in transit, the seventeen patches can be used independently or in harmony, letting you decide what areas to protect.
$6.00
Customize the decal colour of your OneUp Carbon Handlebar with this die-cut vinyl decal kit. Also includes extra decals for your bike, helmet, water bottle, truck, or dog*. Choose from 12 colours.
Red, Green, Blue, Orange, Purple, White
Gloss Black (looks awesome on the carbon bar)
Turquoise (Yeti Turq)
Oil Slick (Shiny Holographic)
Silver (Matches Pike and Lyric's Polished Chrome)
Gold Matte Metallic (matches Kashima and Gold Cassettes)
Bronze Matte Metallic (matches Copper cassettes)
*OneUp does not recommend applying decals to animals.
HOW TO APPLY
Step 1: Cut out the decal you want to apply from the sheet
Step 2: Remove the White paper backing
Step 3: Apply decal
Step 4: Remove the clear transfer tape, leaving only your coloured decals
$12.99
- Compatible with 70cc and 100cc pumps
- Glass reinforced nylon with stretch polyurethane strap for secure rattle-free storage
- Mounts to water bottle bosses
$23.99
- UV stabilized stretch polyurethane strap
- Securely fastens spare tube or gear to your frame
- Won't absorb water and mud like a Velcro strap and won't scratch your frame
$39.99 - $54.99
- A Threadless no tap install option that lets you store the EDC V2 Tool inside your stem/steerer tube without threading your steerer tube
- The Threadless Carrier replaces your star nut and lets you preload your headset with a bolt, while also creating a space for the EDC Tool.
- Easy to install in less than 10 minutes.
- Compatible with EDC V2 Tool (You must use the small EDC V2 Storage Capsule with the Threadless Carrier.) The tire plug and bacon strips fit within the small storage capsule.
- Chain pliers are not compatible with the threadless carrier set up.
- The EDC Threadless Carrier is NOT compatible with V1 EDC Tools (Green Multi-Tool)
$24.00
Everybody knows you can't really shred without a solid power stance. The Power Stance kickstand is the whammy bar of kickstands. Take your city shred session to the next level when you slam down the Power Stance. WEOW WEOW! Built with e-bikes, cargo bikes, touring bikes and commuters in mind, the Power Stance is incredibly sturdy. The length is adjustable by the push of a button for quick installation and easy adjustment if parked on uneven ground. Lean easy for years to come with the ultra burly Power Stance kickstand.
- Direct mount version
- Burly construction is great for supporting heavy bikes
- Adjust the length with the press of a button
- Durable composite foot
- Lifetime PDWarranty
$24.00
Everybody knows you can't really shred without a solid power stance. The Power Stance kickstand is the whammy bar of kickstands. Take your city shred session to the next level when you slam down the Power Stance. WEOW WEOW! Built with e-bikes, cargo bikes, touring bikes and commuters in mind, the Power Stance is incredibly sturdy. The length is adjustable by the push of a button for quick installation and easy adjustment if parked on uneven ground. Lean easy for years to come with the ultra burly Power Stance kickstand.
- Center mount version is compatible with almost any adult bicycle
- Burly construction is great for supporting heavy bikes
- Adjust the length with the press of a button
- Durable composite foot
- Lifetime PDWarranty
$17.99
Small PVC top tube protector. Helps protect your top tube if your drop bars spin into your frame in a fall. Fits 1-1/8" top tubes.
Note: To ease installation soften the PVC by heating with a hair dryer or place it in very hot water for a few minutes.
- Modern, minimalist top tube protector
- Easy on-and-off installation
$8.95
Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.
$8.99
Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.
$12.00
Vinyl adhesive decal, perfect for tool boards, vehicles and trailers. Available in black or white.
Dimensions: 36 x 4.5-inches
Page 1 of 3
Next page