Electric Bike Accessories

Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure. - Fits Presta/Schrader - Accurate up to 160psi - Shows PSI and bar - Weighs only 37g

XLAB's Gorilla Carbon Cage is one of the most popular rear bottle cages on the market! It boasts an amazing 7-pound grip force to keep bottles in place on bumpy roads and it's been specifically tweaked to work perfectly with saddle-mounted cage carriers. The Gorilla has over two times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit.

The B-RAD Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base. Most commonly used for smaller, curved or dual suspension frames where the slotted bases won't fit or are not needed.

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames

B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts

The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads

B-RAD Half Bottle Mounts allow for cargo customization and cargo optimization. Designed to work in tandem with B-RAD Base, the Half-Bottle Adaptor moves the bottle over about half a bottle radius to make it easier to access. The Accessory strap mounts can be mounted to the other side providing a mounting point for additional items. - Mounts to the B-Rad base mount (not included

Be rad with the B-RAD System, the ultimate Bottle Relocation and Accessory Device. Mount your bottles away from inconvenient rear shocks, add storage room for tools or tubes below a bottle cage, and provide space for a second bottle on sufficiently long downtubes—all with one patented design. Our handy 1-1 template helps you determine which Base measurements match your frame and our selection of B-RAD Replacement Parts ensures you’ll never go without a particular feature or strap. Stay hydrated and prepared on every ride by carrying your essentials right where you need them! Half Bottle Adapter lets you offset the bottle cage location to make your bottle more accessible, and to fit additional accessories like a pump, tool, tube, etc. - Easy to access bottles and out of the way of legs - Easy to install using existing cage mounts on a bike (B-RAD Base component required; sold separately) - Use the DogBone base for curved downtube frames Great for trail, enduro, bike packing, XC, and town/commuting applications. The B-RAD Mini Strap and Accessory Mount were designed especially for the Half Bottle Adapter so it could be mounted to the side of the bottle. But you can customize it to fit your needs. Works great with modern trail bikes from companies like Pivot, Intense, and Santa Cruz or others with difficult bottle access. Tech Specs: - Material: 6061-T6 aluminum brackets - Weight: 18g - Maximum load: 1700g - Tools Needed: T25 Torx - Torque: 3-4 Nm - Made in the USA

The Wolf Tooth Morse Cage has its name because of the dots and dashes on the mounting plate that provide for up to 32mm of vertical placement adjustment. This allows the rider to change bottle cage position based on restrictions of frame size, frame bags, or mount placement. - Hand-bent hollow tubing - Fits any bike frame that has two standard bottle cage mounts with 64mm spacing - Easily bent back in to shape if damaged - Made by hand in Minnesota

- The Wolf Tooth Morse Cage is a lightweight and low profile way to reposition bottle cages. - Named for its dot-dash-dot-dash mounting pattern, the Morse Cage base plate offers four positions across 32mm of vertical adjustment, fully capturing one mounting bolt in every position to prevent movement. - Can be bent back into shape if damaged, and is available in both titanium and stainless steel

The Helmet Handsfree Kit allow the rider to access hydration directly inside their helmet. The product is directly attached tot he helmet with a few simple modifications and is very easy to use. This attachment is compatible with the following products: - Raw - Ranger - Core

This is a race hydration backpack streamlined to go superlight and almost invisible on your back. The OUTLANDER 2 is geared-up with the award winning No Dancing Monkey 4-point harness that makes the pack 100% bounce free in action. The stretch support of the harness allows you the freedom to move in full speed and in any gnarly condition. - Zero bounce with NDM 1.0 harness-Our patented harness system with 4-point performance suspension - Only the essentials-Stay as lightweight as possible with a slick 2L hydration pack - 1.5L / 50oz Elite Hydration Bladder included with fixed tube coupling THE MOUNTAINBIKE BACKPACK GIVING YOU THE EDGE WHEN RACING The OUTLANDER 2 is a mountain bike backpack designed for pro riders going superlight at marathon distances. But honestly, the hydration pack will fit any rider perfectly who’s searching for a bad-ass backpack with hydration that won’t cramp you speed or style. This pack is a racer and we guarantee you will love it, no matter if you are a pro or a happy amateur rider. STAY HYDRATED IN ACTION To keep you hydrated and focused while on the move, we picked a durable 1.5 / 50oz liter Elite hydration bladder to go inside the pack, with a big slide opening at the top for quick filling of ice and water. And after the race, the bladder is fully reversible for easy cleaning and drying. The Hydraflex drinking tube sits securely close at hand with the tube clips.

OUTLANDER 3 is a lightweight race 3L hydration backpack with a super smart external on/off organizer pocket for tools and gear. This unique on/off solution makes it possible for you to strip off the pocket and go superlight (2L) when you're in that race mode. Fitted with the award winningNo Dancing Monkey 4-point harness that makes the pack 100% bounce free in action. - Zero bounce with NDM 1.0 harness-Our patented harness system with 4-point performance suspension - Only the essentials-Stay as lightweight as possible with a slick 3L hydration pack - Detachable Multi Pocket-Decide if you go light or superlight for the day. THE MOUNTAINBIKE BACKPACK GIVING YOU THE EDGE WHEN RACING The OUTLANDER 3L is a mountain bike backpack designed for pro riders going superlight at marathon distances. But honestly, the hydration pack will fit any rider perfectly who’s searching for a badass backpack with hydration that won’t cramp you balance or style. This pack is a racer and we guarantee you will love it, no matter if you are a pro or a happy amateur rider. CARRY YOUR GEAR The Outlander is the perfect minimalistic biking backpack with a total storage of 3L. If you want to go extra light you can pop of the organizer pocket, perfect for racing. When using a MTB backpack you might end up wetter than expected, so we added a water-resistant phone pocket at the back, you will probably thank us for that later! STAY HYDRATED IN ACTION To keep you hydrated and focused while on the move, we picked a durable 1.5 / 50oz liter Elite hydration bladder to go inside the pack, with a big slide opening at the top for quick filling of ice and water. And after the race, the bladder is fully reversible for easy cleaning and drying. The Hydraflex drinking tube sits securely close at hand with the tube clips.

Our vinyl-coated cage is specifically designed for holding the taller stainless steel bottles, without scratching or rattling. Its straight-back design allows the bottle to rest comfortably and securely in the cage. - Stainless steel cage with a black vinyl coating - Fits any size frame tube or seatpost with a Velcro strap - Will not scratch metal bottles or remove paint - TF-41 is capable of holding bottles up to 24oz - TF-42 is capable of holding standard Nalgene bottles - Made in the USA

The Voda 15 Water Bottle is clean, consistent, at-the-ready hydration for any ride. The compact size provides 15 ounces of thirst-quenching hydration that's designed to easily fit on smaller bike frames. It's made from recyclable, FDA-approved materials free from BPAs and Phthalates. Plus, it has a Pop Top cap that's easy to open and offers secure closure for leak-free transport. - Compact 15-ounce size easily fits into smaller frames and on kids bikes - Pop Top's soft thermoplastic poppet is easy to open and close - Designed for easy entry/removal and secure retention - Bottle and cap are dishwasher safe and recyclable - USDA approved and free of BPAs and phthalates - Fun, long-lasting graphics resist scratching for a look that lasts - Manufactured in the USA

Voda Flow is a premium water bottle with great in-hand feel and a Flow Top cap that offers lockable easy-squeeze hydration. The No-Drop Grip Ring adds a texture for a confident grasp even when wet, and it's all wrapped up with long lasting graphics that stay looking fresh for miles to come. Recyclable, FDA-approved materials are free from BPA's and Phthalates. - A premium bottle that provides great in-hand feel and consistent leak-free closure - Flow Top cap's heart valve and soft-touch poppet offers easy-squeeze hydration - Secure threaded cap with easy open-and-close poppet locks down leaks - No-Drop Grip Ring provides a grippy texture for confident grasp even when wet - Designed for easy cage entry and removal with secure retention - Bottle and cap are dishwasher safe and recyclable - USDA approved and free of BPAs and phthalates - Manufactured in USA with long-lasting graphics that resist scratching

A dependable water bottle capable of carrying 34 ounces of hydration for lasting refreshment on your longest rides - 34 ounces of hydration with great feel & consistent closure - Fits best on M to XL bikes. Side load cages are recommended for easy entry and removal - Pop Top's soft thermoplastic poppet is easy to open and close - Bottle and cap are dishwasher safe and recyclable - USDA approved and free of BPAs and phthalates - Long-lasting graphics resist scratching for a look that lasts

A premium water bottle that provides secure, leak-free hydration with a great in-hand feel and lasting freshness. The Voda Water Bottle gives you clean, consistent, at-the-ready hydration on any ride. It's made from recyclable, FDA-approved materials free from BPA, BPS, and Phthalates. Plus, it has a PopTop cap that's easy to open but offers secure closure and leak-free transport. Product details: - Redesigned bottle and cap feature all-new materials for great feel and consistent closure - Free of BPA, BPS, and phthalates - PopTop's soft thermoplastic poppet is easy to open and close - Designed for easy entry/removal and secure retention - Bottle, cap, and removable seal are dishwasher safe and 100% recyclable - Long-lasting graphics resist scratching for a look that lasts - Manufactured in the USA

Made using recycled materials, this bottle cage features durable, affordable composite construction for road or MTB use. YOUR ECO HYDRATION STATION The Elite Recycled Water Bottle Cage provides the same secure bottle hold as the carbon Pro Cage in a more economical and eco-friendly form. The cage is made from recycled composite material and is available in a wide variety of colors to suit your bike from trail to tarmac. PRODUCT DETAILS - Made using 67% post-consumer recycled ocean plastic - Super strong and lightweight construction - Secure bottle retention suitable for road and mountain use - Available in a wide variety of colors

The only thing better than fresh water on a long, hot ride is cold fresh water-that stays cold. Voda Ice is an insulated water bottle that keeps your water cold for longer and comes in a game-changing 28-ounce size that lets you carry more of it. The premium Flow Top cap and No-Drop Grip Ring give this bottle a great in-hand feel with easy-squeeze hydration. - A premium insulated bottle that keeps water cold, feels great in-hand, and provides leak-free closure - Form fit insulation layer keeps water cold twice as long as traditional bottle - Flow Top cap's heart valve and soft-touch poppet offers easy-squeeze hydration - Secure threaded cap with easy open-and-close poppet locks down leaks - No-Drop Grip Ring provides a grippy texture for confident grasp even when wet - Designed for easy cage entry and removal with secure retention - Bottle and cap are dishwasher safe and recyclable - USDA approved and free of BPAs and phthalates

A simple rear bike light for after dark. The Flare R Metro is a simple USB rechargeable rear bike light that can help cyclists be seen after dark. The versatile design and included bike mount make for easy, tool-free attachment to any bicycle. Remove the included mount to reveal a built-in clip that securely attaches to a rider's belt clip, pocket, or bag. Details: - A versatile USB rechargeable rear bike light designed to help riders stand out after dark. - 20 Lumens help make riders more visible after dark - Triple LED design can be seen from a wide visibility angle - Versatile design can be mounted on a bike, belt, or bag - Two steady modes and one flash mode - Low steady 8L-3 hrs, high steady 20L-1.5hrs, Flash 20L-6 hrs - Includes Flare R Metro, Clip Connect Mount, and Micro USB charging cable - Integrated clip for secure installation on belt or bag, simply remove the mount to access - Clip connect mount with 16-degree offset compensates for seatpost angle

The RSL Aero Water Bottle is a replacement or e/tra aero water bottle to fit in your Trek RSL Aero Bottle Cage. WATER NEVER TASTED SO AERO Specifically designed to be used with the RSL Aero Bottle Cage (sold separately) to make you more aerodynamic on the bike. The RSL Aero Water Bottle is for the rider who values speed just as much as this fast and functional water bottle with e/cellent squeeze and easy-to-use poppet. PRODUCT DETAILS - Tested 1.8 watts faster at 22 mph on the Madone Gen 8 compared to standard round bottles - Tested faster on other race bikes in our aerodynamic modeling system - RSL Aero Water Bottle & Cage system is UCI Compliant to ensure safety at all levels of competition - USDA approved and free of BPAs and phthalates - Bottle and cap are dishwasher safe and recyclable - Pop Top's soft thermoplastic poppet is easy to open and close - Long-lasting graphics resist scratching for a look that lasts

When you need to keep your warm beverages hot and your cold beverages chilled, reach for the Trek Ride Bikes Have Fun Tumbler. It's perfect for any occasion and always reminds you to ride bikes, have fun, and feel good. - Stainless steel design - 20 fl oz (591ml) - Do not microwave - Hand washing and drying is recommended

Made with recycled materials, this side-entry bottle cage offers easy bottle access on small frames and in tight spaces. SIDE LOADING FOR TIGHT SPACES The Side Load Recycled Water Bottle Cage lets you easily access bottles while you ride. It's built from recycled materials and fits neatly in small spaces, making it the ideal choice for smaller frames, full suspension bikes, and when using a frame bag. Great for mountain and road riding alike. Using recycled materials in this product helps provide second life to unwanted end of life plastics. PRODUCT DETAILS - Made using recycled plastic - Lightweight and durable composite construction - Side-loading design allows for easy bottle access on compact frames - Mount it on the down tube for left-side water bottle access - Mount it on the seat tube for right-side water bottle access - Suitable for road and mountain use

Made with recycled materials, this side-entry bottle cage offers easy bottle access on small frames and in tight spaces. SIDE LOADING FOR TIGHT SPACES The Side Load Recycled Water Bottle Cage lets you easily access bottles while you ride. It's built from recycled materials and fits neatly in small spaces, making it the ideal choice for smaller frames, full suspension bikes, and when using a frame bag. Great for mountain and road riding alike. Using recycled materials in this product helps provide second life to unwanted end of life plastics. PRODUCT DETAILS - Made using recycled plastic - Lightweight and durable composite construction - Side-loading design allows for easy bottle access on compact frames - Mount it on the down tube for right-side water bottle access - Mount it on the seat tube for left-side water bottle access - Suitable for road and mountain use

Original replacement rack for Trek 920. Product details - Designed to fit forks with forward-facing eyelets at the dropout - Designed specifically for use with Trek 920 bikes Specifications - Size: One size - Rack type: Front racks - Adjustable feet: No - Disc compatible: Yes - Includes light mount: No - Weight capacity: 50 lbs (22 kg) - Material: Aluminum

A secure, direct-mounted saddle bag with quick connections for the Blendr Fendr and rear lights - Quickly connect Blendr Fendr and rear lights with purposeful mounts in seconds - Two internal pockets reduce rattling and hi-vis material makes it easy to find what you need - Made with durable, soft, and water-resistant nylon with an easy to use zipper - Integrated design that mounts directly to compatible saddles with 2 m5 hex bolts - Compatible with Aeolus, Verse, Boulevard, and Commuter saddles. Not compatible with RSL-level saddles - Included: bag, mount, spacer, one pair of short bolts, and one pair of longer bolts

A compact and powerful USB rechargeable rear bike light that's daytime visible from up to 2km away. THE ULTIMATE DAYTIME RUNNING LIGHT The Trek Flare RT tail light is the ultimate daytime-visible rear bicycled light for road rides, daily commutes, and beyond. It features a bright, rechargeable light that can be seen from up to two kilometers away. An integrated light sensor auto-adjusts brightness based on your environment, making it easy to stay visible day or night. PRODUCT DETAILS - Specifically designed focus, flash, and range for ultimate daytime visibility - 90 Lumen interruptive flash pattern can be seen from up to 2km during the day - Integrated light sensor auto-adjusts brightness to your environment - Connect with compatible ANT+ devices for always-on, battery status, and wireless control - Flash modes: 90LM-6hrs, 45LM-12hrs, 5LM-15hrs Steady modes: 25LM-4.5hrs, 5LM-13.5hrs - Confidently ride through wet conditions with an updated USB port and IPX7 waterproof rating - Battery save mode provides 30 minutes of additional runtime when battery life reaches 5% - Includes Flare RT, rear Quick Connect bracket, and Micro USB charging cable

A helmet with big kid features for smaller riders. TODDLERS NEED HELMETS, TOO Designed to help protect the young cyclist in your life, the Little Dipper toddler helmet features a built-in visor and easy-to-use magnetic buckles with a kid-friendly fit. It's perfect for little ones riding in a trailer, a child carrier, or all on their own. PRODUCT DETAILS - In-molded EPS shell with full coverage designed for protection and durability - Fidlock magnetic buckle fastens effortlessly for a quick, kid-friendly fit - Soft, removable helmet pads that are easy to clean - Dialed fit system provides a secure and comfortable fit - Adjustable helmet straps provide a clean look with easy fit management - Crash Replacement Guarantee provides a free helmet replacement if involved in a crash within the first year of ownership - Helmet meets ASTM standards—their tests use a smaller mass headform that's more realistic to younger riders - Complies with U.S. CPSC safety standards for bicycle helmets for persons age 1 and over Size Circumference - Toddler: 46 - 50 cm/18" - 20"

A comfortable, versatile helmet with clean aesthetics and the added protection of Mips. - Mips safety system helps provide additional protection from rotational forces in the event of certain cycling-related accidents - Refined styling with removable visor easily transitions from road to trail - Large vents and recessed channeling keep you cool on warm days - Trek Headmaster 3 fit system provides simple and secure adjustability with just one hand - Soft, comfortable helmet pads wick moisture and are easy to wash after a full day of fun