Cables

- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends

- Thermally bonded PTFE coated slick galvanized cable for minimal friction - Premium stainless-slick low-friction, rust-resistant cable - Economy galvanized standard replacement cable - AX-2654 and AX-2657 are double ended, with both Road and MTB anchors - 1700mm length

- Plastic guide with ziptie for securing housing/Tubing nearly anywhere on the bike

- Basic housing and galvanized inner cable with header card - Brake kit includes black casing and a 1.6mm cable - Derailleur kit includes black casing and a 1.2mm cable - Cables have dual ends with leads to fit any brake or shifter

- Premium 31-strand stainless-slick low-friction rust-resistant cable - X-long 3000mm cables for non-traditional uses

- Aluminum guides for securing housing/tubing to frame cable stops or cable guides

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

- Pre-stretched Teflon coated 19 strand inner wire - new packaging

- Pre-stretched Teflon coated 19 strand inner wire

- Pre-stretched stainless 19-strand inner wire - Slick profile for smooth performance - New Packaging

- Pre-stretched, stainless 19-strand inner wire - Slick profile for smooth performance - 2000mm length - Use: brake - Length: 2000mm - Diameter: 1.6mm - Front/rear set

- Cable and housing set with special ferrules and end caps - Anti-compression housing reinforced with Kevlar and super slick inner sleeve - Prestretched stainless steel inner cable with slick outer profile - Rubber donut frame protectors included

- Cable and housing set with special ferrules and end caps - Anti-compression housing reinforced with Kevlar and super slick inner sleeve - Pre-stretched stainless steel inner cable with slick outer profile - Rubber donut frame protectors included - SRAM and Shimano compatible - Cable diameter: 1.5mm - Casing diameter: 5mm

Our Box One Inner Shift Cable is the perfect upgrade for your Box Three or Box Four cable. It is also an ideal replacement for your Box One or Box Two cable set-up. When combined with our Box One housing it has proved to be superior to most competitive product. We have data that demonstrates lower initial resistance and substantially less difference in resistance over time. FEATURES - Our Best Performing Cable - Slick Coated - Inner Cable 2100mm - (2) 1.8mm Cable End Crimps COMPATIBILITY - Works with 11, 9, 7, 8, 12, and 10 speeds - Weight: 14.6 grams

Our Box One Shift Cable & Housing Kit is the easiest way to get silky smooth and consistent shifts on any drivetrain. Replace your Box One, Box Two, Shimano and SRAM kit, or upgrade your Box Three or Box Four set-up. This kit is a combination of our best performing Cable Housing and Slick Coated Stainless Steel inner cable. In lab tests this combination has proved to be superior to most competitive product. We have data that demonstrates lower initial resistance and substantially less difference in resistance over time. FEATURES - Our Best Performing Cable - Inner Cable 2100mm - Our Best Performing Housing - 4mm Housing 2000mm - Prepared with silicone grease - (2) 1.8mm Cable End Crimps - (3) 4mm Sealed Short Ferrules COMPATIBILITY - Works with 12, 11, 10, 9, and 8 speeds. - Weight: 84.3 grams

Improve the performance of your tandem drivetrain with fresh stainless cables coated in smooth Teflon for friction-free shifting. Longer than a standard shift cable, its length will get the job done for any tandem. Key features: - Compatible with all Shimano, SRAM, and Campagnolo systems - Smooth surface reduces friction and improves performance - Teflon cables are friction-free and rust-proof - Stainless steel cables are permanently rust-free - Length: 3000mm

Upgrade the performance of your road brakes with this incredibly smooth and reliable cable. - Upgrade the performance of your brakes with this smooth and reliable cable; - Extra-long 2750mm length ensures fitment for any application - Compatible with road brake systems - Low-friction cable is rust-proof, comes pre-stretched, and includes cable end cap

Upgrade the performance of your drivetrain with this incredibly smooth and reliable cable. - Upgrade the performance of your drivetrain with this smooth and reliable cable - Extra-long 3100mm length ensures fitment for any application - Compatible with Shimano and SRAM drivetrains - Low-friction cable is rust-proof, comes pre-stretched, and includes cable end cap

Rejuvenate the performance of your brakes with this convenient and valuable kit that includes all parts needed for installation. Kit includes lubed housing, pre-stretched stainless steel cables, ferrules, cable frame protectors, and cable end caps for front and rear brakes. - This convenient and valuable kit is the key to restoring your brake's performance - Compatible with nearly all braking systems - Stainless steel cables are 2750mm and 1700mm long, for front and rear brakes - Compressionless housing comes pre-lubed is 3000mm long - Kit includes Comp brake ferrules, cable frame protectors, and cable end caps - Included stainless steel cables are rust-proof and come pre-stretched

- 11-Speed brake & shift cable/housing set - Special 4.1mm derailleur housing for reduced friction - Everything you need for a Campy-equipped bike in one simple kit - Fits all Campagnolo Ultra-Shift, Power-Shift, Ergopower, Time Trial and Flat bar systems - Includes 4 cables, housing & ferrules - Cable Head: Road - Diameter: 1.2 mm - End Type: Campy - Housing Diameter: 4.1 mm

380mm long, single-ended straddle for mountain cantilever brakes

- 1.5mm x 1700mm advanced die-drawn stainless steel cable is low friction with minimal elongation for smooth and responsive braking performance - Recommend for use with Ciclovation™ Premium or Advanced outer casing systems - Compatible with all cable-actuated road bike brake systems - Compatible with all high-performance outer casing, lubricants, and end caps

- Dispenser of rubber cable O's

- Dispenser of chromed ferrules - 5mm

- Stainless steel top tube cable clamp. 4g each

Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar

Hose kits for Hayes hydraulic disc brakes include stiff, durable hose and the necessary fittings.

K2 Hydraulic Hose Kit for Dominion Prime Stroker and El Camino Hayes proprietary hose kit is reinforced with Kevlar for strength and durability. Kit includes: 200cm rear hose and all fittings.

- Simple solution for frames that do not have housing stops - CNC aluminum with two housing stops per guide

Machined aluminum adjusters offer precise, ergonomic cable adjustments. - Quick release downtube cable housing stops allow easy lubrication of shift housing - Includes barrel adjusters and mounting bolts