Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Riser

Bontrager Kovee Elite 35 MTB Handlebar
$69.99
- Oversized 35mm clamp diameter offers increased strength and minimal weight - Shifter and brake lever position lines for spot-on control setup - 4 degree upsweep and 9 degree backsweep optimal for XC and trail - 40mm of cut marks on each side allow for easy width customization
Bontrager Line 35 MTB Handlebar
$79.99
A 35mm mountain bar that maintains a forgiving ride feel and maximizes strength with minimal weight. Large and in charge Line 35 is ready for any terrain and changes what's possible on the trail. It maintains comfort and control on any ride, and an oversize clamping diameter increases strength and decreases overall bar and stem weight while ensuring a compliant, forgiving ride. Proven sweep and convenient graphic markings help dial in the perfect setup. Product details - Oversized 35mm clamp diameter offers lighter weight and higher strength than 31.8mm diameter - Quad-butted, tapered wall, 7050-T6 aluminum construction - Laser-etched brake lever position lines for spot-on control setup
Bontrager Line Pro Carbon 35 27.5mm Rise MTB Handlebar
$179.99
The Line Pro Carbon MTB Handlebar adds strength and saves weight. This trail-tough bar has an oversized 35mm diameter, and it's built with OCLV Carbon so it's strong enough for even the most demanding trails and compliant enough for comfort on long descents and rugged terrain. - Pro-level quality handlebar in oversized 35mm clamp diameter offers increased strength and minimal weight - 27.5mm high rise helps you dial in the perfect hand position - Brake and shifter lever position lines for spot-on control setup - 40mm of cut marks on each side for easy width customization - OCLV Carbon construction is the benchmark for durability and light weight
Bontrager Line Pro Carbon 35 MTB Handlebar
$179.99
The Line Pro Carbon MTB Handlebar adds strength and saves weight. This trail-tough bar has an oversized 35mm diameter, and it's built with OCLV Carbon so it's strong enough for even the most demanding trails and compliant enough for comfort on long descents and rugged terrain. - Pro-level quality handlebar in oversized 35mm clamp diameter offers increased strength and minimal weight - 15mm rise helps you dial in the perfect hand position - Brake and shifter lever position lines for spot-on control setup - 40mm of cut marks on each side for easy width customization - OCLV Carbon construction is the benchmark for durability and light weight
Bontrager Line Pro Carbon 35 MTB Handlebar
$179.99
A 35mm OCLV Carbon handlebar that adds strength, saves weight, and maintains compliance on rugged MTB trails. Pin it to win it The Line Pro Carbon MTB Handlebar adds strength and saves weight. This trail-tough bar has an oversize 35mm diameter, and it's built with OCLV Carbon so it's strong enough for even the most demanding trails and compliant enough for comfort on long descents and rugged terrain. Product details - Pro-level quality handlebar in oversize 35mm clamp diameter offers increased strength and minimal weight - 15mm and 27.5mm rise options to dial in the perfect hand position - Brake and shifter lever position lines for spot-on control set-up - 40mm of cut marks on each side for easy width customization - OCLV Carbon construction is the benchmark for durability and light weight
Chromag Cutlass
$180.99
All Mountain / XC The Cutlass bar crosses categories from XC to Enduro with a 31.8mm diameter and width of 780mm. 220g of premium quality unidirectional carbon fiber ensures that this bar is about reliable strength and durability with a responsive feel. It features a 25mm rise for aggressive rider position tuned with a 5° upsweep, 8° bend orientation. The geometry of this bar now matches our OSX perfectly.
Deity Components Highside
$78.99 - $84.99
- All new DJ/ Slopestyle premier handlebar designed for progression - 760mm wide - Featuring our Exclusive Gradient Butting technology - 31.8mm center bore - Full bead blast finish for increased durability and fatigue resistance - 9 degree bend / backsweep and 5 degree upsweep for ultimate comfort - Available in black ano finish with color graphic options - Covered by our Lifetime Crash Replacement Policy to the original owner - 50mm: 323g - 80mm: 334g
Deity Components Blacklabel
$89.99
The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams, the BLACKLABEL 800 is the evolution of over a decade of DEITY handlebar development. By widening the center bore area, we could increase strength while still delivering an incredibly comfortable, stable, and responsive feel that is unmatched. This premium race good is built for championships! - 800mm width - Designed for DH / Enduro / All MTN applications - Dirt Mag Top 100 Product - 4 years running for 2014, 2015, 2016, and 2018 - Incredibly detailed two-tone bead blast and polished ano finish - 9-degree bend / backsweep by 5-degree upsweep - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - Designed for maximum ride quality with a 31.8mm bore - World Cup DH / Redbull Rampage / Crankworx and FMB World Tour proven - The handlebar of choice for the Scott / Velosolutions and Norco Factory Racing World Cup teams - Features measured cut marks and center alignment detail - Covered by our Lifetime Crash Replacement Policy to the original owner - 15mm rise: 333g - 25mm rise: 342g - 38mm rise: 343g
Deity Components Racepoint
$89.99
The all-new Racepoint Aluminum DH Handlebar was made with our proprietary Gradient Butting Technology, which allows us to put material where we need it and nowhere we don't. This makes for a significantly stronger handlebar at a similar weight to our competitors. We are 100% confident our new 35mm bore Racepoint DH Handlebar demolishes the competition with an 810mm width in both 25mm and 38mm rise options. You simply won't find a more refined handlebar option with this level of detail, durability, and performance. - Oversized 35mm Bore Aluminum Handlebar - Designed for Downhill / Enduro / All Mountain - Incredibly detailed two tone bead blast and polish ano finish - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - 810mm wide - 9 degree bend x 5 degree upsweep - Flex and deflection characteristics designed to match the Blacklabel handlebar - Features measured cut marks and center alignment detail - Black ano finish with colored graphics - Covered by our Lifetime Crash Replacement Policy to the original owner - 25mm rise: 327 grams - 38mm rise: 330 grams
Deity Components Ridgeline
$89.99
When designing the all-new Ridgeline aluminum trail handlebar, our goal was to create the perfect trail bar that disappears beneath you while encouraging you to chase adventure and seek out new experiences wherever possible. We precisely targeted lower rise options at 15mm and 25mm with a stable width of 800mm for a more efficient and aggressive position on the bike. To do this, we took an oversized 35mm bore platform and dispersed the load over an 800mm width. It was critical for us to keep the weight down without sacrificing strength. This is where our unique proprietary Gradient Butting Technology shines, allowing us to remove excess material in areas of less stress and fatigue that can cause the stiff feeling commonly felt with other 35mm handlebars on the market. We can then add material to areas of greater stress and fatigue to increase the long-term strength and durability. This gives you, the rider, more confidence to chase new experiences and forget about the gear beneath you. Our goal is for you to become one with the bike and never let up on chasing your new adventure! - Oversized 35mm Bore Aluminum Handlebar - Designed for Enduro / All Mountain / Trail - Incredibly detailed two-tone bead blasted and polished ano finish - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - 800mm wide - 9 degree bend x 5 degree upsweep - Flex and deflection characteristics designed to match the Skyline handlebar - Features measured cut marks and center alignment detail - Black ano finish with colored graphics - Weight: 303 grams
Deity Components Skyline
$89.99
DEITY's expanded aluminum handlebar line now includes the SKYLINE 787 All MTN / Enduro / Trail handlebar. We've taken all of our experience in developing the strongest handlebars and implemented a featherweight version to bring DEITY to the top of the mountain! Utilizing our trade-secret Gradient Butting Technology, while investing the time and cost to properly heat-treat each handlebar model individually, we are able to deliver the lightest premium DEITY aluminum handlebar in the line. Most manufacturers don't take the time or absorb the cost to heat treat a single production handlebar model separately from other models. Nevertheless, the resulting 20% increase in strength in all of our aluminum handlebars is just one of the many reasons we go the extra mile at any cost to allow you to climb – descend – repeat! - The DEITY All MTN / Enduro / Trail handlebar - 787mm wide - The SKYLINE handlebar is our lightest aluminum bar - Ultra-sleek two-tone bead blasted and polished ano finish for incredible detailing and durability - Custom Gradient Butted 7075 T73 aluminum - Featuring a 31.8mm bore for lightweight performance and strength - Features measured cut marks and center alignment detail - 9 degree bend / backsweep by 5 degree upsweep - Black ano finish with color graphics - Covered by our Lifetime Crash Replacement Policy to the original owner Sizes: - 15mm (290gm) - 25mm (296gm)
Deity Components BF800 Brendog
$91.99
Brendan Fairclough's signature handlebar is an homage to the effortless style, grace, and speed exemplified by Brendan's every move. The BF800 Brendog signature handlebar, which has been developed and tested on the World Cup DH circuit for almost three years to perfect the feel he demands for World Cup-caliber speed. Creating the perfect combination of rise, width, bends, sweep, flex, and responsive damping is not an easy task, but DEITY has perfected the ability to deliver the best-feeling handlebars with unparalleled strength time-and-time again. Utilizing Brendan's preferred 8-degree backsweep with our favorite 5-degree upsweep gives this bar a more aggressive positioning to attack the gnarliest DH trails in the world. At an 800mm width and featuring a 30mm rise, our proprietary Gradient Butting Technology coupled with our Mono Heat Treatment Procedure delivers a handlebar that is more than 20% stronger than any other handlebar from our competition at this weight category. We guarantee you will look as good as Brendan riding his signature BF800 Brendog Handlebar while you're pushing your limits to match his speed and style! So get your hands on DEITY's latest and greatest rider collaboration, designed to elevate your ride to podium status! - The Brendan Fairclough Signature Handlebar - Designed for DH / Enduro / All MTN applications - Developed and tested rigorously for nearly 3 years on the World Cup DH circuit - Incredibly detailed two-tone bead blast and polished ano finish - Brendog signature 8-degree bend / backsweep by 5-degree upsweep - 800mm width - Custom butted 7075 T73 aluminum utilizing our proprietary Gradient Butting Technology - Mono Heat Treatment Procedure for increased strength - Stiffness for tracking yet compliant for endless chatter and big hits - Wider center bore spacing for unrivaled stability - Designed for maximum ride quality with a 31.8mm bore - Alignment control markers for perfect set up and spacing of your levers - Features measured cut marks and center alignment detail - Black ano finish with color graphics - Covered by our Lifetime Crash Replacement Policy to the original owner - 30mm rise (343 grams)
Deity Components Skywire Carbon
$169.99 - $179.99
After years of research and development dedicated to perfecting the 35mm bore handlebar, DEITY has created the best-feeling carbon line of handlebars to date. Gone are the days of blown-out hands and varying degrees of arm pump after a day on your new 35mm bore oversized super-stiff handlebar. Our all-new Skywire Carbon Trail handlebar delivers the same level of strength and comfort you've come to expect from DEITY with a very specific focus on increased performance and time on the bike. Perfectly spec'd at 800mm wide with 15mm and 25mm rise options, this beauty promises to keep you on the bike longer with a shorter recovery between rides. - Oversized 35mm Bore Carbon Handlebar - Designed for Enduro / All Mountain / Trail - Developed and designed exclusively with our own in house DEITY molds - Unidirectional Carbon Construction - Damping properties reduce hand fatigue - 800mm Width - 9 degree bend x 5 degree upsweep - The ultimate combination of strength, weight, and ride quality - Textured non slip stem clamping surface - Textured grip ends for added bite - Covered by our Lifetime Crash Replacement Policy to the original owner - Recommended MAX Torque Spec range (4 - 4.5 Nm) - 15mm rise: 222 grams - 25mm rise: 226 grams
Deity Components Speedway Carbon
$169.99
For DEITY, speed motivates us in everything we do and is certainly the inspiration for the all-new Speedway Carbon DH Handlebar. Built for the most demanding and brutal conditions in the world with only one goal at hand…insane, mind-numbing speed. Not only do all DEITY carbon handlebars beat every other bar on the market in strength, they are specifically refined to allow the rider to push the limits while maintaining complete control. At 810mm wide with a 30mm rise, this 35mm bore handlebar is impressively responsive and comfortable at the same time. We've found the sweet spot that absorbs maximum vibration, chatter, and impact while maintaining the stiff reactive feeling that allows you to dance on the edge of catastrophe, ever increasing your need for speed. - Oversized 35mm Bore Carbon Handlebar - Designed for DH / Enduro / All Mountain - Developed and designed exclusively with our own in house DEITY molds - Unidirectional Carbon Construction - Damping properties reduce hand fatigue - 30mm Rise - 810mm Width - 9 degree bend x 5 degree upsweep - The ultimate combination of strength, weight, and ride quality - Textured non-slip stem clamping surface - Textured grip ends for added bite - The strongest 35mm Downhill / Enduro Carbon Handlebar on the market! - Available in Matte Unidirectional Black Carbon with colored graphics - Covered by our Lifetime Crash Replacement Policy to the original owner - Recommended MAX Torque Spec range (4 - 4.5 Nm) - Weight: 245 grams
Dimension Mountain Handlebar 35mm Rise
$24.99
For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards. - Shot-peened finish - 6061-T6 Aluminum - 9-deg backsweep - 720mm wide - 35mm rise
ENVE M9 Mountain Handlebar 31.8mm
$169.99 - $179.99
A race-proven handlebar, the M9 bar is ENVE's dedicated downhill option. Designed around a 31.8mm clamp diameter and a downhill-focused flex profile, this bar’s celebrated ride feel defined the potential of a DH carbon fiber bar and realigned performance expectations. The M9 bar features 8-degree backsweep and 4-degree upsweep. - Material: Carbon - Weight: 245g (30mm rise); 265g (50mm rise) - Bar Width (Max): 810mm - Bar Width (Min): 780mm - Clamp Diameter: 31.8mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm
FSA Comet Riser Handlebar
$44.99
Budget-friendly mountain bars with stylish flair. - Plain gauge, tapered and shot-peened AL6061/T6 - Shot-peened for surface hardness - 15mm rise - 9° backsweep, 4° upsweep - Bar Clamp Diameter: 31.8mm - Material: Alloy - Width: 740mm
FSA SL-K Low Rise Handlebar
$115.00
The SL-K Riser Bar is the ultimate mix of light weight and strength for a handlebar that is designed for all types of riding. Its CSI (Carbon Structural Integration) construction marries the best of both worlds of carbon and aluminum. The carbon helps keep the vibration to a minimum, while the aluminum core maintains a majority of the strength. The SL-K handlebar is XC weight-matched with Enduro strength. With a solid 740mm width and 18mm rise, this bar will help with a perfect fit, great control, and peak performance for even the most demanding rider in mind. - UD carbon and AL6066 material - Carbon Structural Integration (CSI) - Textured stem clamp zone - 18mm rise - 9° backsweep, 4° upsweep - UD carbon finish
Pro FRS Handlebar
$57.99
The FRS handlebar is a wide bar constructed of AL-2014 T6 Material, with a 9° Backsweep and 5° Upsweep combination, ideal for maximum control in rough terrain.
Pro Koryak Di2 Riser Handlebar
$69.99
The Koryak Di2 handlebar is constructed of strong AL-2014 double-butted aluminum and is ideal for AM, Trail, and XC riding. It features compatibility with Shimano Di2 cable and battery integration.
Race Face Chester Handlebar
$45.99
Race Face's Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs. These bars will last long after your bones, bruises and scrapes heal up and you’re ready to tackle that gap jump that has had your number. Features - Manufactured from cold drawn, seamless 6061 Alloy. - Butted for an optimal strength to weight ratio. - Wider construction & re-designed taper offers - 740mm wide - 9° rearward, 6° upward
Race Face Aeffect Handlebar
$49.99
The Race Face Aeffect handlebar is a budget-friendly alloy bar intended for XC and Trail use — the most affordable option for riders looking for a 35mm handlebar. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 8°
Race Face Aeffect R Handlebar
$54.99
A slightly modified profile gives the RaceFace Aeffect R handlebar the extra boost you’re looking for at high speeds. Built for tearing down your favorite trail...fast. Generous 780mm width to give you the stance and control you need. This is a no-nonsense, set-and-forget bar that is equally at home on your trail bike as it is on an enduro machine. Take your bike to the Rally level without breaking the bank. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 9°
Race Face Chester 35 Rise
$54.99
Do you love to ride your mountain bike? Love boosting big airs, punishing the trails and your gear? You just want parts that can take a beating and won't let you down — the Chester 35 bar is made for you. These bars will last long after your bones, bruises and scrapes heal up and you're ready to tackle that gap jump that has had your number. - Manufactured from cold drawn, seamless 6061 Aluminum - Shot peened for increased fatigue life - 35 optimized triple butted design
Race Face Atlas Riser Handlebar
$79.99
Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep
Race Face Turbine R 35 Handlebar
$79.99 - $89.99
Wider than Turbine but still sporting the agressive sweep design putting you in the perfect riding position, these bars come in a variety of rises to allow you to fine tune your cockpit and dial in your setup. Tried and tested 7075 aluminum gives you the confidence for agressive all-mountain riding and 35mm technology for fantastic overall weight/strength ratio. Your six inch travel bike will thank you. - Manufactured from cold drawn, 7075 Aluminium - 35 optimized triple butted design - Turned up to Rally control with 800mm width - Rise sizes to for every build and preference 10/20/35mm - Stealth black on black decals to match every frame color
Race Face Atlas 35 Riser Handlebar
$84.99 - $89.99
Your favorite bars just got bigger, wider, and lighter, Go figure? The magic of 35—believe the hype! Increasing the bar diameter to 35mm allowed Race Face to shave material from the bar resulting in a dramatic reduction in overall weight while retaining the proven stiffness, strength and performance Race Face bars are known for. The ATLAS 35 bar also expands to an 800mm width (Can be trimmed down to 750mm) for hyperspeed control, can you handle it? - Proven design and durability of the Race Face Atlas bar, with increased stiffness and reduced weight of the 35mm bar platform - Requires 35mm bar clamp diameter stem - Full 800mm width that can be trimmed down to a minimum 750mm - 8 degree rearward sweep, 5 degree upward sweep
Race Face NEXT 1/4-inch Riser Carbon Handlebar
$149.99
- Intended for Cross Country and Trail use - 1/4 Risers have a 2deg upsweep - Unidirectional carbon fiber with reinforced stem anti-crush zone - Bar Clamp Diameter: 31.8 mm - Bar Rise: 5 mm - Bend: 8 deg - Weight: 175 g
Race Face NEXT 3/4-inch Riser Carbon Handlebar
$149.99
- Intended for Cross Country and Trail use - 1/4 Risers have a 2deg upsweep; 3/4 Risers have a 4deg upsweep - Unidirectional carbon fiber with reinforced stem anti-crush zone - Bar Clamp Diameter: 31.8 mm - Bar Rise: 20 mm - Bend: 8 deg - Weight: 175 g - Width: 725 mm
Race Face SixC 3/4 Riser Handlebar
$159.99
Race Face set an industry benchmark with the its Sixc product group - light and strong carbon DH rated crank and bar. Building on the unprecedented success of their proprietary Carbon Technology program, SIXC rewrites the rules in the 6-8 inch travel bike world. SIXC (the C is silent, eh!) represents the culmination of years of Race Face engineering in both carbon and all mountain products. Race Face has created a bar for the aggressive rider who demands the ultimate in performance. Strong enough for DH, yet light enough to not hold you back on the pedal up to that new trail you have been hearing so much about, SIXC blows up the limits of carbon performance. - SIXC bars are manufactured with a leading edge composite material which allows us to reach our high strength requirements at an impressively low weight - Minimum bar width of 28" or 710mm at indicated cut marks - Reinforced clamping zones for lock-on grip - Daily destructive testing from each production run ensures each bar meets the exacting standards set by our engineers
Page 1 of 3 Next page