Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other
$95.00
Replacement handlebar display unit specifically for your Townie GO! 7D bike.
Product details:
- 22.2mm handlebar mount
- Compatible with Townie GO! 7D only
$18.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: 1-bolt
$4.99
$9.99
50% Off
Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.
$38.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase
- Forged 6061 aluminum
- Threaded alloy top cap
$15.00
Surly wants you to be able to set up you ride just the way you want it. This pair of adapter washers make it so you can throw your favorite 135, 170, or 190mm O.L.D. 10mm solid axle hub into the rear end of a 142, 177, or 197mm spaced thru-axle frame. Add the adapters, add the wheel, install and tighten the nuts and, bam, you're ready to rip.
Make sure the solid axle on your wheel is the right length for the frame spacing. For instance: 190mm OLD QR goes with 197mm thru-axle spacing.
$9.99 - $12.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
$20.00
- Powermeter Crank Arm Bolt Kit and AXS Cover Plug Drive Side M18/M30 Dub Steel Black Rival D1
$4.99 - $5.99
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.
$10.99
Upgrade or refresh your Bontrager wheels.
- Sealed cartridge bearing for long life
- LLH seals for the best combination of low resistance and durable sealing
$20.00
- Compatible with Shimano, SRAM, Campagnolo and KMC 11 speed chains
- DLC Coated
- Non-reusable
- Opening Tool Required
- Card of 2 pairs
$19.99
Shimano's In-Line Brake Cable Adjuster with quick release allows you to make changes to your road caliper brake's cable tension or open a brake caliper's arms to remove a wheel.
$24.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For use with 142x12mm, 148x12mm, 157x12mm, and 197x12mm hubs
Specifications:
- Size: Rear drive side, Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut
$6.99
Genuine replacement parts
Genuine replacement parts
Original Equipment specifications.
Compatible with Bosch Powertube RIB batteries.
- Hardware should be ordered separately
$5.99
Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.
$13.99
- Wears and functions like other links on the chain
- SIL-TEC surface treatment
- Tool free installation possible
- TL-CN10 is available as SM-CN900-11
- Single use
$10.99
- Quiets chain slap and protects chainstays from nicks and scratches
- Standard protector fits most chainstays
- Universal kits come with circle protectors to eliminate frame damage due to cable rub
$39.99 - $69.99
ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.1 connects Shimano I-Spec A/B shifter to I-Spec II brake.
- Made from CNC Machined T6061 Aluminum
- Anodized Black
- No additional hardware needed
ReMatch 1.1 is NOT compatible with Deore M610 or SLX M670 shifters
$14.99 - $16.99
With this clever little clamp you can quickly retro-fit any bike for a rear rack. Threaded eyelets are built into the clamp for easy, secure mounting on non-eyeleted or smaller frames.
- Features threaded eyelets for rear rack mounting solutions on unique bike frames
- Quick release (QR) versions include rubber lever grip
$11.99
One of the coolest things about Surly is if they can't find an existing part that fits their standards, they just make one themselves. This cable hanger is made to fit around the oversize bolt on their Constrictor seatpost clamp so you can be sure it will fit around almost any other seatpost clamp bolt too. It comes complete with an adjusting barrel.
$46.99
Arm Pad Set for Bontrager aero bars that offers support and comfort in the aero position.
- inForm BioDynamic products optimize natural position for sustained performance
- Ergonomic pad shape for ideal pressure distribution and support
- Dual density pad provides a firm base with softer upper layer
- Velvety soft cover and dual density padding provide secure and comfortable feel
- Vacuum tooled design provides a consistent pad wrap and clean aero look
- Cradle offers a stiff aero-proven design to support rider and cheat the wind
- Compatible with any Speed Concept bar as well as all Bontrager clip-on aero bars
- Includes pads, cradle, and mounting hardware
$20.00
Whether for derailleur clamp clearance, tire clearance, or personal preference, sometimes it can be advantageous to run the wheel further back in the dropouts. Monkey Nuts install into Surly horizontal dropouts to make spacing the wheel back easy. There are 3 different sets depending on the type of dropout and axle configuration the dropout is intended for. Simply select the correct version of Monkey Nut, install it into the frame, and slam the wheel all the way forward. Bang, done.
$17.99
These bar end adapters are required if you wish to add clamp-style bar ends to your Bontrager Satellite Plus Isozone handlebars.
- Required for bar end use on Satellite Plus Isozone bars
- For use with clamp style bar ends
- Includes 2 adapters and 2 rubber handlebar inserts.
- Bar end sold separately
$18.99
Key features:
- Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails
- Compatible with Bontrager and Trek rotary head seatpost and seat mast systems
- Consult with manufacturer on compatibility with other saddle brands
$20.99
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Front, Not applicable
- Mounting location: Front
- Attachment: 2-bolt
$4.99
Trek proprietary suspension hardware.
- Trek full suspension rocker pivot suspension hardware
- First used as ABP Spacer for Top Fuel 26 2009 and other ABP Race designs
- Widely used as rocker link pivot spacer 2016-2022
$21.99
Upgrade or refresh your Bontrager wheels.
- End cap for Bontrager Rapid Drive 108 hubs
- Sold individually
$31.99
Genuine replacement parts
Get back on the trail with a quality replacement hanger.
Don't be left hanging.
- Attachment hardware is sold separately
- Compatible with Superfly SS 2015-2016 (142x12mm OLD)
- Compatible with Stache 29+ 2016-2022 (148x12mm OLD)
- Compatible with 1120 2018-2022 (148x12mm OLD)
- Compatible with Farley 2016-2022 (197x12mm OLD)
$9.99
Thin, durable clear chainstay protector with extra-strong adhesive.
- Overall length - 10.375
$21.99
In true DEITY fashion, the Crosshair Headset Cap exemplifies the style and detail you've come to expect from everything DEITY offers. We've included 3mm, 5mm, and 8mm spacers that are color-matched to create a clean refined option to finish off your cockpit. Not only are the cap and spacers machined from 6061 Aluminum, the bolt is CNC Machined from 7075 Aluminum to give you a precise and extremely durable centerpiece that is truly hassle-free.
- Complete Aluminum 1 1/8" Headset Cap Kit
- Features 7075 T6 Machined Aluminum Bolt
- Includes 3mm, 5mm, and 8mm Spacers
- Spacers Feature a Thin Profile For a Minimalist Style
- Countersunk Bolt Design
- Kit Includes the Star Nut
- Weight: 13 grams (without star nut)
$131.99
Genuine replacement parts
Genuine Trek replacement part to protect your eBike battery.
Keep the dirt out.
- For use with removable integrated battery system
- For use with 500W Bosch RIB batteries
Page 1 of 60
Next page