Salsa Bikes

Blackthorn C XTR comes equipped for challenging all-mountain terrain. The carbon fiber frame lends the stiffness you need to hold your line. The 140 mm Fox Float X Factory shock and 160 mm Fox Float 36 Factory GRIP2 fork ensure that you can handle just about any feature that's waiting around the next berm. Progressive geometry and our Split Pivot suspension design keep things composed on wicked descents and put you in a position to overcome tough climbs. Our pack-free riding features include a padded tube strap spot, top tube mount, and bottle mount for a lighter load on your back. Shimano's gold-standard XTR 1 x 12 groupset and four-piston brakes make speed modulation as smooth as it gets. All told, we think it's the best all-mountain bike out there—we invite you to see for yourself. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.

2,700 miles. 200,000 feet of climbing. Smooth gravel, rough forest roads, and singletrack all in the same day for weeks on end. This is the Tour Divide, and Cutthroat C X01 Eagle AXS is engineered to thrive on it. The lightweight carbon frameset is stiff where it matters for power transfer and our Class 5 VRS provides compliance where comfort is the priority. Our drop-bar mountain bike geometry puts you in position to conquer all-day efforts on nearly any surface. Cutthroat comes with a variety of mounts for water and gear to help you haul everything you'll need until the next opportunity for resupply. Rounding out the package is SRAM's X01 Eagle AXS Eagle electronic drivetrain, an unparalleled riding experience with a gear range to get you over any mountain pass.

Warbird C Force eTap AXS Wide is a high-tech gravel race rig. The carbon frame features our Class 5 VRS, cutting down on the harsh bumps that take a toll on your body. Warbird's geometry emphasizes stability and comfort, for a smooth ride feel you'll be thankful for on long days in challenging conditions. Plentiful frame and fork mounts mean you can bring everything from extra bottles to a bikepacking kit on your rides. SRAM's Force eTap AXS Wide group is a wide-range 2 x 12 system with the ease of wireless electronic shifting. Saddle up and chase podiums on the best gravel race bike we've ever made.

It would be nice if every road ride was on brand-new blacktop, but for real-world road riding, there's Warroad C Ultegra Di2. When your route inevitably turns to rubble, the 700c x 32 mm wheels and tires maintain momentum while providing traction and a supple ride. Our Class 5 VRS adds some compliance to the rear end for all-day comfort in the saddle. Dual wheel size compatibility gives you the option of 700c or 650b as terrain and preferences change, making this one of the best adventure road bikes for rides that cover a variety of terrain. Shimano's Ultegra Di2 group offers smooth shifting and proven performance so you can focus on enjoying every mile.

Beargrease is our fat tire bike built to go faster than you knew fat tire bikes could go. The super-light frame and fork and the sure-footed rollover of 27.5 x 4.0" wheels and tires cover challenging terrain quickly. Versatile frame and fork mounts let you carry everything you need for the backcountry. Test yourself in a snowy endurance race or pack your camping gear and embark on a long-distance overnight bike trip.

Cassidy C XT is a well-balanced carbon enduro bike. The stiff frame helps you hold your line through treacherous terrain, while Fox's Float X2 Performance shock and Float 38 Performance Elite GRIP2 soften the trail with 165 mm rear and 180 mm front travel. Progressive trail geometry and our Split Pivot suspension design keep your tires planted both down and up the mountain. On-bike cargo features such as a padded tube strap spot, top tube mount, and full-size bottle clearance support extra laps or longer days out, making Cassidy ideal for enduro adventures. Shimano's XT 1 x 12 components bring smooth shifting, wide range, and four-piston brakes to take it all to the next level. Time to start adding trails to your "must-ride" list. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.

Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It's capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Carbon - TT (Effective): 615 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Carbon frame and seat stays featuring the Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with a long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that's 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec'd with a 29 x 2.5" front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6"

Rustler C XT puts fun first. The lightweight carbon frame, responsive geometry, and 27.5" wheel size keep it nimble for hitting all of your favorite trail features. Split Pivot suspension design means 130 mm of supple yet progressively supportive rear travel that's active enough to provide traction when accelerating, braking, and climbing. Shimano's XT component set is revered around the world and better now than ever, with wide-range 12-speed components for smooth shifting and four-piston brakes to slow you down when necessary. With room for a full-size bottle and a top tube mount for accessories, Rustler might be the best carbon trail bike for a phenomenal day in the woods. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. ON-BIKE STORAGE: Salsa innovated new bottle and accessory mount placements for added utility and ride range. Our gravel and road bikes have mounts on the top tube and underside of the down tube, plus up to five additional bottle mounts for extra hydration, ride accessories, and bikepacking gear. Our mountain bike line features top tube mounts, mounts on the underside of the down tube on hardtail models, and space for multiple bottles on hardtails and select suspension bikes. FRAME PROTECTION: We use various materials to protect our frames and forks from damage, whether it’s a rock strike on the trail or thick, abrasive mud on your favorite gravel route.

For an all-mountain bike with an adventurous side, Blackthorn C XT is the ticket. We designed the stiff carbon fiber frame around progressive geometry that feels planted on descents and climbs. We paired Blackthorn XT's 160 mm Fox Float 36 Performance Elite GRIP2 fork with a 140 mm Fox Float X Performance Elite shock that runs on our Split Pivot suspension platform for excellent small-bump compliance and support. A padded tube strap spot, top tube mount, and bottle mount allow for pack-free riding or extending your range. The Shimano XT 1 x 12 drivetrain and four-piston brakes keep you in control through testing terrain. Blackthorn C XT is a brilliant all-mountain bike equipped for a wide variety of singletrack adventures. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.

Cutthroat C GX Eagle AXS is an ultra-endurance bikepacking machine inspired by the unique challenges that the Tour Divide presents. Its lineage led us to a drop-bar mountain bike geometry that provides confidence even in the most challenging riding conditions. Cutthroat's carbon frame delivers excellent power transfer and the Class 5 VRS rear end soaks up micro-impacts from the road and trail, preserving your stamina. Ample cargo mounts allow you to configure your load to suit your personal preferences. SRAM's GX Eagle AXS groupset is a reliable workhorse—perfect for Tour Divide bikes and rigs that will spend a lot of time deep in the backcountry.

Warbird C Rival XPLR eTap AXS is built to tame the toughest terrain, with a Class 5 VRS-equipped high-modulus carbon fiber frameset. Our gravel race geometry puts you in a comfortable, confident riding position. On-bike cargo features let you gear up for long days of riding far from anywhere. SRAM's sure-shifting Rival XPLR eTap AXS drivetrain is a technological marvel with loads of gear range. As the industry's first gravel race bike, Warbird is designed and built to provide control, comfort, and speed when the going gets rough.

Warroad C Rival eTap AXS is the cure for the common road bike. The stiff, lightweight carbon frameset with Class 5 VRS and our endurance road geometry blends performance for spirited riding with comfort for long days in the saddle on any road surface — it's our best bike for gravel and road riding. Extra mounts on the frame and fork hold everything you need for long days out. Dual wheel size compatibility lets you run up to 700c x 35 mm or 650b x 47 mm wheels and tires, and SRAM's Rival eTap AXS drivetrain feels superb and performs flawlessly, no matter where your wanderings take you.

Horsethief is one bike for many trails. From finessing local loops to savoring new destinations, Horsethief has your back. It’s capable of pushing through technical terrain, instills confidence while riding aggressively, and pairs well with beautiful vistas and a post-ride beverage. - Wheel Size: 29", 27.5+ - Front Axle: 15mm Thru x 110mm - Brake Type: Disc - Fork Type: Suspension - Frame Material: Carbon - TT (Effective): 593 - Rear Axle: 12mm Thru x 157mm - Frame Type: Suspension - Carbon frame and seat stays featuring the Split Pivot suspension design with 120mm of efficient travel, remaining fully active under braking while supportive throughout its travel, paired with a 140mm suspension fork - A short stem paired with a long top tube, combined with a 67-degree head tube angle provides descending confidence, yet balances overall wheelbase length and slow speed maneuverability - Every size fits two full-size bottles in the triangle; Anything Bracket and top tube mounts boost cargo space for pack-free riding bliss - Super Boost 157 x 12mm rear hub spacing combined with a standard width bottom bracket results in a 432mm chainstay length that’s 5mm shorter than previous-generations - Rear flip chip adjusts head tube angle and bottom bracket height for terrain, wheel size, and personal preference - Spec’d with a 29 x 2.5" front and 2.4" rear wheel/tire combination, but can accommodate a range of additional sizes of 27.5 x 2.8 - 3.0" and 29 x 2.2 - 2.6"

Blackthorn C SLX stands out in the carbon all-mountain bike field for its capability and value. The progressive geometry feels planted on descents and steep climbs. A 160 mm Fox Float X Performance fork and 140 mm RockShox Lyrik Select+ RC shock with Split Pivot suspension design grants you the poise to plow through rock gardens, send drops, and hit doubles with confidence. Blackthorn brings you the benefits of pack-free riding, thanks to the integrated down tube strap, top tube mounts, and a bottle mount. Shimano's SLX 1 x 12 drivetrain and four-piston brakes are components you can rely on. We designed Blackthorn C SLX from the dirt up to lead the all-mountain category. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.

Cassidy C SLX gives you confidence in your lines. The carbon frame tracks straight through rock gardens and over obstacles, supported by RockShox's Super Deluxe Select+ shock and ZEB Select+ RC fork—good for 165 mm rear and 180 mm front travel. The geometry is long, low, and slack enough to tame the steepest descents, but still lets you earn your turns on the climb back up. Our Split Pivot suspension design is compliant and efficient, promising predictable braking and excellent traction. On-bike cargo features include a padded tube strap spot, top tube mount, and full-size bottle clearance for longer rides and less weight in your pack (if you need one at all). The Shimano SLX 1 x 12 groupset is renowned for its reliable performance. Ready to rip? KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.

Spearfish C SLX is a carbon XC 29er that hits a sweet spot between race-day performance and weekday fun. The carbon frame keeps things light and stiff, while the progressive XC geometry makes descending a blast and climbing a breeze. The Fox Float DPS Performance shock brings 100 mm of travel to our Split Pivot suspension design for efficient pedaling, predictable braking, and unshakeable traction. The RockShox SID Select+ fork delivers 120 mm of travel up front to help handle rock gardens and roots. With on-bike cargo features such as two-bottle capacity and top tube mounts, Spearfish keeps all your ride essentials at hand so you can focus on the trail ahead, not fumbling with a pack. Shimano's trusted SLX 1 x 12 drivetrain shifts smoothly through its wide gear range, so you won't be thrown off your rhythm by a bad shift.

Rustler C SLX is a 27.5 full suspension mountain bike with a focus on maximizing trail fun. A carbon frame, 27.5" wheels, and geometry designed for a lively ride means this is a bike that comes ready to play. Rustler uses a Split Pivot suspension design for 130 mm of rear travel that is supple over small bumps, supportive on bigger hits, and delivers traction when braking, accelerating, and climbing technical terrain so you're less likely to spin out. Rustler also comes with space for a full-size water bottle and a top tube mount that accommodates all manner of ride accessories. Shimano's proven SLX drivetrain and four-piston brakes keep every ride smooth and reliable. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. ON-BIKE STORAGE: Salsa innovated new bottle and accessory mount placements for added utility and ride range. Our gravel and road bikes have mounts on the top tube and underside of the down tube, plus up to five additional bottle mounts for extra hydration, ride accessories, and bikepacking gear. Our mountain bike line features top tube mounts, mounts on the underside of the down tube on hardtail models, and space for multiple bottles on hardtails and select suspension bikes. FRAME PROTECTION: We use various materials to protect our frames and forks from damage, whether it’s a rock strike on the trail or thick, abrasive mud on your favorite gravel route.

Cutthroat C GRX 810 2x is an immensely capable carbon bikepacking bike, designed and built to be a tour de force on the Tour Divide. Cutthroat's lightweight carbon frame with Class 5 VRS offers a finely tuned blend of stiffness for pedaling efficiency and compliance for all-day comfort. Cutthroat's drop-bar mountain bike geometry is stable when picking your way down steep, loose descents but aggressive enough for enduring a full day of headwinds. Ample cargo mounts add versatility to the way you pack. Shimano's refined GRX 810 2x drivetrain delivers effortless shifting and braking and a wide gear range so you can focus on the view.

Cassidy SLX is built for more than just getting downhill the fastest. Sure, the 6061-T6 aluminum frame is up for all the trail punishment you can put it through. And the RockShox Super Deluxe Select+ shock and ZEB R fork have your back with 165 mm rear and 180 mm of suspension travel on tap. Cassidy's geometry and our Split Pivot suspension design ensure your tires stick to the trail, whether you're hurtling downhill or climbing back up for another lap. Unlike other enduro bikes, Cassidy features on-bike storage, such as a tube strap spot, a top tube mount, and full-size bottle mount. This lets you extend your ride time or just get the sweaty pack off your back. With a Shimano SLX 1 x 12 drivetrain and four-piston brakes, you're equipped for any enduro course or trail day. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.

A gravel ride can be whatever you want it to be: go for speed, go for distance, go for fun, go for an escape. No matter your goal, Warbird C GRX 810 2x is a comfortable and efficient way to get there. The carbon frame with Class 5 Vibration Reduction System (VRS) tames harsh roads. Our gravel race geometry grants you control on ruinous roads. Thoughtful mounting points provide places for everything from extra bottles to a light bikepacking setup. Shimano's GRX 810 2x drivetrain has proven itself as a dependable, high-performance gravel group with plenty of gear range for windy flats and steep climbs. Put it all together and you've got one of the best gravel bikes out there.

For those seeking more than just the "Lightest-stiffest-most aerodynamic" road bike experience, Warroad is just the thing. The agile and full-featured carbon fiber frameset is designed with Class 5 VRS for compliance and composure on the rough stuff. Warroad's endurance road geometry is designed for sustained rides, with ample frame and fork mounts for your all-day ride provisions. Designed to accommodate both 700c and 650b wheels, Warroad riders can set up a second wheelset for changing terrain or preferences. Add Shimano's Ultegra components, renowned for light and smooth shifting, and you've got an all-road bike that feels right in every way.

Blackthorn SLX is all-mountain with a side of adventure. The stiff and durable aluminum frame uses our progressive trail geometry for a ride feel that's equal parts downhill ripper and stable climber. The Split Pivot suspension design builds on those qualities with supple-to-supportive travel linked to a 140 mm RockShox Super Deluxe Select+ shock. Paired with a 160 mm RockShox Yari RC fork, Blackthorn has the chops for those rugged lines you've been eyeing. On-bike cargo features like the integrated down tube strap, top tube mounts, and a bottle mount let you keep the ride essentials on your bike rather than your back. Shimano's SLX componentry means a smooth-shifting 1 x 12 wide-range drivetrain, while the four-piston brakes offer all the stopping power you'll need. Blackthorn is a clever and capable rig that brings a lot to the all-mountain table. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. Purpose-Tuned Suspension The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. Progressive Geometry Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. Flip Chip 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS Carbon Main Triangle with Carbon Seatstays and Aluminum Chainstays EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. Top Tube Accessory Mounts Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. Down Tube Three-Pack Mounts Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. Integrated Repair Kit Location Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) Accommodates a 26 oz Bottle All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. Internal Sleeved Cable Routing Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. Molded Frame Protection Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. Chain Guide-Compatible Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). Stealth Dropper Post Routing Compatible with 30.9mm dropper posts for true trail bike performance. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry.

Beargrease pairs a race-ready carbon frame with the capability of fat tires for the ultimate groomed-trail machine. Its trail geometry, dropper post, and 27.5" wheels grant you confidence in loose corners and descents and make for an all-season ripper. Frame and fork mounts for extra bottles and cargo make it easier to gear up for your long days out or even overnighters, and the high-performance XT/SLX drivetrain is the icing on the cake. For light-and-quick confidence on any terrain, Beargrease is one of the best carbon fat-tire bikes out there.

Spearfish SLX is part racer, part rowdy. A 6066-T6 aluminum frame holds up to trail abuse, frame bag strap wear, long miles, you name it. Our progressive XC geometry makes descending easy and climbing efficient. Rocky, technical trails are no sweat, thanks to the efficient pedaling, predictable braking, and traction of our Split Pivot suspension design. A 100 mm Fox Float DPS Performance shock and the 120 mm RockShox SID RL fork mellow out harsh trails to reduce fatigue on long rides. Spearfish's on-bike cargo features, such as two-bottle capacity and top tube mounts, allow for longer rides between resupply points or just an extra lap before heading back to the car. Add Shimano's SLX 1 x 12 components to the mix, and you have an aluminum XC bike that you can rely on through tough racecourses and mellow loops alike.

Rustler SLX is designed from the ground up to be a playful trail bike. An aluminum frame, responsive trail geometry, and the agility of 27.5" wheels mean you can get creative with the trail features. Rustler's Split Pivot suspension design makes the most of its 130 mm of rear travel and is active while accelerating, braking, and climbing for reliable traction. Shimano's SLX drivetrain performs smoothly ride after ride, and the four-piston hydraulic brakes bring the action to a halt when you need it. With space for a full-size water bottle and a top tube mount for ride accessories, it's easier to keep the fun rolling. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. ON-BIKE STORAGE: Salsa innovated new bottle and accessory mount placements for added utility and ride range. Our gravel and road bikes have mounts on the top tube and underside of the down tube, plus up to five additional bottle mounts for extra hydration, ride accessories, and bikepacking gear. Our mountain bike line features top tube mounts, mounts on the underside of the down tube on hardtail models, and space for multiple bottles on hardtails and select suspension bikes. FRAME PROTECTION: We use various materials to protect our frames and forks from damage, whether it’s a rock strike on the trail or thick, abrasive mud on your favorite gravel route.

The Blackthorn C frame blends a stiff carbon fiber chassis with our progressive trail geometry and Split Pivot suspension design. The result is a well-balanced platform for an all-mountain bike that descends with gusto, rails through features, and makes climbing up for lap two as painless as possible. The Fox Float X Factory shock delivers 140 mm of travel to guide you through whatever the trail serves up. On-bike cargo features hold your tube, pump, and repair kit, and more on the frame to lighten up your hip pack—or allow you to ride pack-free. We made Blackthorn C the best all-mountain bike frame around. Take it and make it your dream bike.

Nobody knows what you like as well as you do. When you're hurtling down the trail at high speed, everything needs to be dialed. With 165mm of rear travel, plus our Split Pivot suspension system for pedaling efficiency and consistent braking traction, Cassidy is easy-up, easy-down. Take the Cassidy Carbon Frame, hand-select your dream team of parts, and build the enduro sled you've always wanted.

Built for the rigors of America's longest mountain bike race, the Tour Divide-inspired Cutthroat C GRX 600 1x is one of the best bikepacking bikes for long rides through a variety of conditions and surfaces when speed is of the essence. Designed with drop-bar mountain bike geometry and a lightweight carbon frame featuring our Class 5™ VRS for comfortable compliance, Cutthroat is ready to put in big miles on any terrain. Ample cargo mounts let you distribute weight evenly around the bike for maximum maneuverability. Shimano's GRX 600 1x drivetrain provides brilliant braking and shifting with the gear range for gravel flats and mountain passes alike.

Stormchaser is Salsa's gravel bike for any and all conditions. Ample tire clearance and the single speed-compatible Alternator Flat Mount dropout system will see you through the muddiest rides. Equipped with a suspension fork and dropper post, the Stormchaser GRX 810 1x SUS lets you get rowdy with your route choices.

Salsa Blackthorn Deore brings together performance and adventure. The aluminum frame is stiff enough to keep you on your line and durable enough to toss in a truck bed for shuttling. Our progressive geometry and Split Pivot suspension design offer a well-balanced platform for pedaling, descending, and taking on technical features. A 140 mm RockShox Super Deluxe Select shock and 160 mm RockShox 35 Gold RL fork ensure plenty of travel for gnarly drops, gaps, and other features. On-bike cargo features like a down tube strap, top tube mounts, and a bottle mount let you keep the weight of your ride gear down low on the frame so you're free to move your body without the burden of a pack. With Shimano's robust Deore 1 x 12 drivetrain backing you up, you'll find very few limits out there. Blackthorn Deore is the 29er all-mountain bike for big rides on diverse terrain. KEY FEATURES: SPLIT PIVOT® REAR SUSPENSION SYSTEM: Split Pivot provides a host of impressive suspension characteristics because the system isolates pedaling forces and braking forces from each other, allowing us to tune and optimize the bike for both independently. The concentric rear axle pivot, in conjunction with precise wheel link, brake link, and control link placement, results in: Excellent bump compliance / Incredible pedaling efficiency / Smooth and predictable braking throughout travel / Maximum traction. SPLIT PIVOT + Split Pivot + is our suspension development philosophy that allows riders to swap suspension travel within a single chassis. PURPOSE-TUNED SUSPENSION The Blackthorn-specific control link and shock links optimize the frame geometry and kinematics for its suspension travel, delivering a well-rounded, balanced trail feel. PROGRESSIVE GEOMETRY Blackthorn is long, low, and slack, with a dash of moderation to preserve pedaling performance. A 64.6-degree head tube angle and short-offset fork feel confident when descending loose, steep trails or blasting through rock gardens. A steep 76.5-degree seat tube angle and consistent cockpit sizing makes for a comfortable pedaling position, while the moderate bottom bracket height provides stability at speed without sacrificing pedaling performance in technical sections. The long front center provides stability in extreme terrain while the short 432 mm chainstays make for nimble handling in tight situations. FLIP CHIP 2.0 Integrated into the shock link mount, Flip Chip 2.0 allows simple, quick adjustments to bottom bracket height and head tube angle to account for the rider’s personal preference, terrain, or wheel size and tire diameter. EPS CARBON MAIN TRIANGLE WITH CARBON SEATSTAYS AND ALUMINUM CHAINSTAYS EPS construction allows for greater manufacturing control, smooth surfacing, a simplified bottom bracket junction, and an integrated shock mount. Carbon fiber material offers improved stiffness, better vibration damping, excellent toughness and weight savings compared to other materials. 6066-T6 aluminum heat-treated chainstays add durability. TOP TUBE ACCESSORY MOUNTS Top tube mounts accommodate K-Edge Top Tube Mount for bike computers or the Salsa EXP Series Direct Mount Top Tube Bag. DOWN TUBE THREE-PACK MOUNTS Three-Pack mounts on down tube accommodate a large water bottle on the lower pair and a frame-mounted pump bracket on the upper pair. INTEGRATED REPAIR KIT LOCATION Located in front of the rear shock in the front triangle, we provide a dedicated place for a small repair kit, tube, or bag of gummies. No more loading up your pockets or strapping the essentials to random spots on the frame and damaging the frame finish. Carbon frames feature an integrated reinforced slot and frame protection. Aluminum frames feature a machined strap slot. The slot is sized to accommodate most 3/4"- to 1"-wide straps. A Salsa Tube Strap is included with each frame (Salsa Tube Straps are for use with tubes only) ACCOMMODATES A 26 OZ BOTTLE All Blackthorn sizes accept a standard 26 oz water bottle within the front triangle. INTERNAL SLEEVED CABLE ROUTING Internal tubes guide housing through the frame, simplifying setup and maintenance, and creating a clean bike profile. MOLDED FRAME PROTECTION Molded rubber down tube, seat tube, chainstay, and seatstay guards protect your frame from impacts and abrasion. MULLET BUILD COMPATIBILITY Mullet build compatibility lets riders run a 29" wheel in the front and a 27.5" wheel in the back with minimal impacts to geometry. CHAIN GUIDE-COMPATIBLE Blackthorn frames feature ISCG-05 mounts for chain guides (removable on carbon frames). STEALTH DROPPER POST ROUTING Compatible with 30.9mm dropper posts for true trail bike performance.